Eaves Beam |
|||
MK1 |
Singled skin Eaves Beam. Product no longer available however the gutter brackets are available in limited quantities (MGBA001) |
1990 to 1996 |
|
MK2 |
Doubled Skin Eaves Beam. This is the current eaves beam however the light version is no longer used on Ultraframe fabricated roofs |
1996 to Current Day |
|
MK1 |
Gable Support Beam. This is in the current range and used to support the gable frames over big spans |
2001 to Current day |
|
ULTRAQUICK EAVES |
Ultraquick Eaves Beam. This was an integrated PVC, Aluminium eaves beam gutter design. |
1994 to 2003 |
|
Glazing Bars |
|||
5 SERIES PRE MULTIBAR |
Pre-Multi Single Skinned Bar. This single skin bar is no longer available and no supports (i.e. steel inserts) were available. Overall height was 52mm (not including top cap or GBCA) |
1990 to 1996 |
|
6 SERIES PRE MULTIBAR |
Pre-Multi Single Skinned Bar. This single skin bar is no longer available and no supports (i.e. steel inserts) were available. Overall height was 60mm (not including top cap or GBCA) |
1990 to 1996 |
|
7 SERIES PRE MULTIBAR |
Pre-Multi Single Skinned Bar. This single skin bar is no longer available and no supports (i.e. steel inserts) are available. Overall height was 73mm (not including top cap or GBCA) |
1990 to 1996 |
|
5 SERIES MULTIBAR |
Fluted Double Skin Bars. This small double skin bar is no longer available and no supports (i.e. steel inserts) are available. Overall height was 55mm (transom including top cap) |
1996 to 2007 |
|
6 SERIES MULTIBAR |
Fluted Double Skin Bars. This small double skin bar is no longer available and no supports (i.e. steel inserts) are available. Overall height was 65mm (Transom including top cap) |
1996 to 2007 |
|
7 SERIES HEAVY BAR |
Fluted Double Skin Bars. This small double skin bar is no longer available and no supports (i.e. steel inserts) are available. Overall height was 78mm (Transom including top cap) |
1996 to Current day |
|
7 SERIES LIGHT BAR |
Fluted Double Skin Bars. This small double skin bar is no longer available and no supports (i.e. steel inserts) are available. Overall height was 78mm (Transom including top cap) |
2005 to Current Day |
|
Ridge Bodies and Wallplates |
|||
MK1 |
This was a fabricated aluminium body via our in house fabrication department. No parts are available for this product |
1990 to 2009 |
|
MK2 |
This was our first extruded aluminium bodied ridge. No parts are available for this product |
1992 to 1994 |
|
MK3 |
This was our 2nd extruded aluminium bodied ridge with a ridge top cap tie rod included. No parts are available for this product |
1994 to 1996 |
|
MK4 |
Formed Aluminium Ridge Body. The much improved unit was the first to incorporate ridge carriages and the baffle was split in to two, a new undercladding and top cap was added. Pitch ranges are 15 to 40.9 degree |
1996 to 2005 |
|
MK5 |
Formed Aluminium Ridge Body. The MK4 ridge was slightly improved to with a new ridge carriage and the glazing 'hole' was enlarged. Pitch ranges are 15 to 40.9 degree |
2005 to Current Day |
|
VENTILATED |
Ventilated Wallplate was our first and only version which is still current to date. this can accommodate pitches from 5 to 30 degree |
1996 to Current day |
|
PWLA |
Latest Variable Wallplate is our latest offering of the basic wallplate. there is no top cap with this product. Pitch ranges are 5 to 45 degree |
2006 to Current Day |
|
PWL |
Low Pitch Wallplate was one of our first basic wallplates with no top caps designed for under soffits etc. This was a fixed ridge and the pitches ranged from 5 to 10 degree. Replaced by the PWLA |
1996 to 2006 |
|
PWP |
Variable Wallplate was one of our first basic wallplates with no top caps designed for under soffits etc. This was a variable ridge with the pitches ranging from 10 to 30 degree. Replaced by the PWLA |
1996 to 2006 |
|
Glazing Bar Top Caps |
|||
CAPA |
Standard Top Caps are still available within our current range (although some are not available due to loosing the smaller bars such as 5 and 6 series bars). These are a singled skin product |
1990 to Current day |
|
CHAMBERED |
These top Caps have a chamber built in that gives better thermal performance. |
2005 to Current Day |
|