Product Code |
Product description |
Product Picture |
Info |
Product Position |
PVC-U FIXING BLOCK |
This is pushed into the glazing bars then fixed down to the front window frames |
|||
GABLE FASCIA COVER |
Clip onto the starter bar back to cover the joint between the starter bar and the gable below |
|||
4.5X38MM STARTER BAR FIXING SCREW |
Used to secure the starter bar through the front fascia trim |
|||
ALUMINIUM STARTER BAR CLIP |
used for non modular scenario's. When the end panels require modification, this allows the panels to connect to the starter bars. |
|||
ALUMINIUM STARTER BAR |
Used either on top of the gable frame of against the wall |
|||
STARTER BAR END CAP (LEFT) |
Located into the end of the starter bar as a cover |
|||
ALUMINIUM GLAZING BAR |
Slides in between the glazing material and acts as a structural post connecting the wallplate with the front frames. |
|||
GLAZING BAR TOP CAP |
Clips into the transom bar once inserted into the panels. This enables the roof to become secure and water tight |
|||
TRANSOM / INTERMEDIATE BAR END CAP |
Located into the end of the transom / intermediate bar as a cover |
|||
STARTER BAR END CAP (RIGHT) |
Located into the end of the starter bar as a cover |
|||
PVC-U STARTER BAR TOP CAP |
Clips into the starter bar once the panel has been inserted. This enables the roof to become secure and water tight |