Product Code |
Product description |
Product Picture |
Info |
Product Position |
ALUMINIUM GLAZING BAR |
>> | Main aluminium glazing bar |
||
GLAZING BAR PVC SLEEVE |
>> | Main aluminium glazing bar PVC sleeve/cover |
||
TRANSON LOW PROFILE CAPPING |
>> | Standard transom glazing bar top cap |
||
GEORGIAN LOW PROFILE CAPPING |
>> | Standard transom glazing bar top cap |
||
STEEL REINFORCEMENT |
>> | used for structural strengthening of the aluminium glazing bar when over a certain length |
||
CLICKLOCK HUB |
>> | positioned at the ends of the hip bars which enables connection to the eaves beam |
||
STARTER BAR LOW PROFILE END CAP |
>> | located at the bottom of the glazing bar as a visual cladding |
||
TRANSOM LOW PROFILE END CAP |
>> | located at the bottom of the glazing bar as a visual cladding |
||
GEORGIAN BAR LOW PROFILE END CAP |
>> | located at the bottom of the glazing bar as a visual cladding |
||
M6X50 BOLT |
>> | used to secure the clicklock hubs to the glazing bar |
||
LOCKING NUT M6 |
>> | Used to anchor the jack rafter rotary locking receiver to the glazing bar |
||
ANCHOR CLIP |
>> | This stops the glazing bar from slipping in the glazing bar sleeve |
||
GLAZING BAR ROMOVAL TOOL |
>> | used to slide into a pocket behind the clicklock hub and press the release button to allow removal of the glazing bar. |
||
SECURITY CLIP |
>> | used to secure the glazing bar top cap the the glazing bar sleeve (anti theft device) |
||
JACK RAFTER ROTARY LOCKING RECEIVER |
>> | This is the female part (fit to the jack rafter) required for the fixing of the jack rafter to the Georgian bar |
||
JACK RAFTER ROTARY LOCK |
>> | This is fixed on to the 'eorgian bars for using a rivet to enable the attachment of the jack rafter bars |
||
4.8X21 RIVET |
>> | This is used to fix the jack rafter rotary lock to the 'eorgian bar for the use of jack rafter bars |
||
VICTORIAN JACK FLASH |
>> | Slide up the glazing bar and positioned directly above the rotary lock. This is used to make the area water tight on installation |
||
GEORGIAN JACK FLASH |
>> | Slide up the glazing bar and positioned directly above the rotary lock. This is used to make the area water tight on installation |
||
ALUMINIUM RIDGE HANGER |
>> | locates and secures the ridge body to the wall and provides a fixing for the starter bars |
||
ALUMINIUM STARTER BAR |
>> | Fixes to the ridge hanger and against the house wall |
||
PVC STARTER BAR SLEEVE |
>> | Locates around the aluminium starter bar and act as a sleeve |
||
M6X10 TAPTITE SCREW |
>> | Used to secure the Aluminium ridge hanger to the aluminium starter bar |
||
M6X12 TAPTIT SCREWS |
>> | required to secure the aluminium starter bar to the eaves bracket |